|
|
|
| 37080 Hot Wire Foam ThermoCutter |
$104.95
|
|
|
|
 |
|
|
|
 |
|
|
37080 Hot Wire Foam Cutter Specifications:
| Cutting Wire Temp |
210-290°F |
| Transformer Secondary |
Max 10V at 1.0A |
| Voltage |
110-120 V AC, 60 HZ |
| Weight |
6.6 lbs. |
|
|
|
|
|
|
|
|
The large base with 15 23/64" x 11 1/64" (390 x 280 mm) table ensures smooth and easy movement of the work piece. The printed grid and protractor assist with division and cutting. Solid aluminum over arm has a 13 25/32" (350 mm) throat and offers 5 33/64" (140 mm) in height. The holder and wire coil (98 ft, .008" diameter is included) may be shifted along the over arm to enable miter cutting. An LED indicates operation and helps prevent burned fingers (the cutting wire heats to the maximum temperature in less than 1 second).
Note:
The correct temperature, being dependent on material and thickness, is learned from experience. Optimum profiles are cut at lower temperatures and cutting force.
|
|
|
 |
|
 |
|
|
| Double function fence with lockable feed bar. |
Crosscuts are achieved by means of a simple, yet efficient solution: secure a drawing-pin to the work table with tape, it serves as a fixed center. |
|
|
SPARE CUTTING WIRE FOR ABOVE HOT WIRE CUTTER
|
|
|
|
|
|
 |
28080 Spare Cutting Wire
Used on the THERMOCUT and other similar units. Made of NiCr 8020, spool of 98 ft x .008". $11.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
