|
|
|
|
|
|
| 37160 Cut-Off Mitre Saw KGS80 |
$194.95
|
|
|
 |
|
|
|
|
|
|
|
|
 |
|
This machine is ideal for mitre cuts: the round worktable with clamped work piece rotate, not the headstock!
|
|
1. Laterally moving saw head to minimize distance between vise holding the work piece and kerf. For cutting without vibration and chattering.
2. The fence and 45° mitre capability ensure identical lengths for picture frames.
3. Comfortable grip with built-in switch and saw head release button.
4. Tungsten carbide blade for NF metals, wood and plastic. Direct drive via a toothed belt.
5. Round table made of die-cast alu, rotates 45° left and right. Positive stops in 15° increments.
6. Integrated clamping system with fixed jaws. V-slot for round work pieces. Front side slot allows thin pieces to be clamped.
|
|
| Description:
The laterally moving headstock (patent DP 103.18.479.1) eliminates any possibility of the blade and clamping system colliding. The minute spacing between the kerf and clamping system ensures cutting with a minimum of chatter and vibration.
The fence and 45° mitre capability ensure identical lengths for picture frames. Powerful, quiet DC motor. Power transmission takes place via a toothed belt. The tungsten tipped blade (80 x 1.6 x 10 mm, 24 teeth) cuts NF metals, wood and plastic.
Technical Data:
110 V. 200 W. 50/60 Hz. 4,000 rpm. Table size 230 x 230 mm. Weight approx. 6 kg. Consult the table for cutting capacities.
|
|
Cutting capacity at 90°
(right angle cut):
|
Material size
(in mm)
|
Max. material width
(in mm)
|
Round material
(in mm)
|
|
10
|
65
|
|
|
18
|
50
|
|
|
21
|
40
|
|
|
25
|
25
|
Ø max. 25
|
|
Cutting capacity at 45°
(mitre cut):
|
Material size
(in mm)
|
Max. material width
(in mm)
|
Round material
(in mm)
|
|
5
|
36
|
|
|
10
|
30
|
|
|
15
|
25
|
|
|
20
|
18
|
Ø max. 20
|
|
|
|
SAW BLADES FOR ABOVE SAW
|
|
|
|
|
|
|
|
|
 |
|
28729 Cutting disc with reinforcement,
Ø 80mm x 1.0mm, Corundum compound, used on steel, NF metal, plastic and wood.
$4.25 |
|
|
|
|
 |
28732 Tungsten tipped blade
Ø 80mm x 1.6mm, 36 toothed. The high tooth count yields clean cuts when cutting a variety of materials, e.g. balsa, plywood, soft wood and PC cards. May also be used on hard wood, POLYCARBONATE, plastic and alu. Fits the table saw FKS/E as well.
$37.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
