Proxxon Tools: Bench Drill Drill Machine TBM115

38128 Bench Drill Machine TBM115

$208.95

A perfect high quality drill press for all types of drilling needs. Drill micro holes down to 1/64". features a practical, adjustable depth gauge. Optional machine vise MS4 (is not included) Add the micro compound table KT70 for a high precision machine center. See below.

This Proxxon unit offers a high quality machined work table of ribbed die-cast aluminum (worktable size 8 21/32" x 4 23/32" (220 x 120 mm) providing an adjustable fence with scale. The solid, hard-chromed steel column is 11" high (280 mm) and has a diameter of 3/4" (20 mm). The 110-120V/85W motor, which runs very quiet and has a long life expectancy is built in to the super stable die-cast head of the machine.

The power transmission by 3-step aluminum pulleys and flat belt provides 3 spindle speeds of 1,800, 4,700 and 8,500 rpm allowing triple torque at low speeds. The chrome feed lever has an adjustable depth scale.

The spindle is essentially free of play as a result of the 3 high quality ball bearing assemblies. For the insertion of MICROMOT steel collets it is recessed, but also threaded for attaching drill chucks with 3/8" thread (for this option see below the Roehm drill chuck, which we offer as an accessory). The spindle has an extremely high rotational accuracy and a 1 3/16" (30 mm) feed. The quill diameter is 1 1/4" (32 mm) with return spring, the throat depth (column to drill spindle) 5 1/2" (140 mm). The unit provides quick coarse height adjustment of headstock via clamp lever. The max. height (worktable surface to spindle end) is 5 1/2" (140 mm).

The unit comes with six triple slit MICROMOT precision steel collets for shaft sizes ranging from 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 mm).

ATTACHMENTS FOR ABOVE DRILL MACHINE

28122 Chuck for TBM115 Drill Press

$13.50

Roehm chuck for drill bits up to 15/64" (6 mm)

For drill shank sizes 1/64" to 15/64" (0.5 to 6.0 mm) and maximum speeds up to 10,000 rpm this chuck offers industrial quality with extra high-speed accuracy. With 3/8" thread for MICROMOT bench drill machine TBM 115, including chuck key.

28132 Machine Vise MS4

$18.75

The vise is made of die-cast zinc and has three machined sides. The grooved base fits perfectly the adjustable fence of either drill stand MB 140/S or bench drill machine TBM 115.

The jaws are 2" (50 mm) wide and 25/64" (10 mm) high and provide horizontal and vertical V-slots for holding round work pieces. The maximum clamping width is 1 11/32" (34 mm). The anvil top with a cast-in hole is optimal for supporting small and fine parts when drilling.

27100 Micro Compound Table KT70

$93.95

Two clamps are included.
Table of 7 7/8" x 2 3/4" with 3 t-slots.
Hand wheels with adjustable dials, 1 revolution = 1.0 mm (25/64"), 1 division = 0.05 mm (0.002").
Adjustable scale eases work piece positioning.

Drill stand and rotary tool above not included.

Small and Accurate - Ideal use for Drill Stand MB 140/S and Bench Drill Press TBM115

Made of surface treated solid aluminum and fitted with adjustable dovetail slides and three T-slots manufactured to the MICROMOT standard (12 x 6 x 5 mm, approx. 15/32" x 15/64" x 13/64"). The adjustable scale eases work piece positioning. Both hand wheels have zero resettable dials with graduations indicating 1 revolution = 1.0 mm (25/64") and 1 division = 0.05 mm (0.002").

The clamps and securing bolts as shown in the picture (for the drill stand MB 140/S and bench drill machine TBM 115) are included.

Technical details: Table size 7 7/8" x 2 3/4" (200 x 70 mm). X travel 5 7/32" (134 mm) and Y travel 1 13/16" (46 mm), overall height 1 11/16" (43 mm).

Complete line of drill bits